Professional Tile & Grout Cleaning
STEP ONE: Break the Bonds
A chemical solution or blend of chemicals may be applied to the soiled tile floor in order to loosen dirt and break the chemical bonds between the tile and foreign particles. After allowing the chemical solution to set for a few minutes, the tile floor is then buffed using an industrial buffing machine. This machine uses a rotating flat brush to further loosen any ground in dirt or stains. The bristles are safe and effective for use on any type of hard floor surface.
STEP TWO: Remove Dirt and Stains
The next step is to use a Turbo Force machine to rinse and dry the floor. The Turbo Force cleaning tool has three spinning jets that spray water and chemical solutions at very high pressures to remove stains. Because the jets rotate within the chamber , the pores of the tile are bombarded with steaming water from all directions. The water and chemical solution is instantly extracted from the floor using a powerful truck mounted extractor, leaving stains no time to resettle into the pores of the tile. This two step process is guaranteed to remove all stains from tile and grout.
STEP THREE : Prevent Future Stains
The grout and tile surfaces themselves may be sealed in order to prevent dirt and stains from settling in the pores of the floor. For grout sealing, the sealer is applied directly to the grout using an in-line spray machine. The sealer must then be allowed to dry for 30-60 minutes. The excess is then wiped off of the floor. The sealant will protect the grout from absorbing stains for the following 3-5 years. The tile and grout should then come cleaner after future cleanings, and spills can be wiped up easily without soaking into the grout . The sealer comes with a 2-3 year warranty (depending on the age and original condition of the tile before cleaning and sealing.)